浪涌發生器PG1275E是根據MIL-STD-1275E/GJB298-1986專門設計用于測試軍用28Vdc電路的浪涌和尖峰的敏感性。最大永久電流為16A或由400A的可選外部二極管模塊提供。
這款浪涌發生器PG1275E是根據MIL-STD-1275E/GJB298-1986專門設計用于測試軍用28 Vdc電路的浪涌和尖峰的敏感性。 最大永久電流為16 A或由400 A的可選外部二極管模塊提供。 對于尖峰測試,電流限值由外部5μHLISN(人工網絡)給出。 可以使用LISN的不同版本。 發生器可以由計算機通過RS232或USB接口完全控制
This generator PG1275 is specially designed for the test of the susceptibility to surges and spikes of military 28 Vdc electric circuits. The equipment allows performing the following tests according to MIL-STD 1275D of: imported and exported spikes, imported and exported surges. The surge voltages are supported up to 125 V and the spike charging voltage up to +/-500 V. The maximum permanent current of the 5 μH internal coil is 400 A dc. The pulse generator can be ordered with all the accessories in order to build the full test set-up basically consisting of batteries and an oscilloscope. The generator can be fully controlled by a computer through a RS232 or an USB interface.
SPECIFICATIONS
Type | PG1275E |
Transients supported | injected spikes and injected surges |
EUT operating voltage | 28 Vdc |
EUT operating current (spikes) | depending on the LISN |
EUT operating current (surges) | 16 A (400 A with the DM400 diode module) |
Surge charging voltage | up to 200 V |
Spike charging voltage | up to ± 500 V |
Output connectors | BNC and 4 mm safety sockets |
Remote control | RS232 and USB |
Operating temperature | 0 – 40 oC |
Power supply | 210 - 264 Vac / 50 - 60 Hz / 100 VA |
Dimensions | 610 x 450 x 200 mm (L x W x H) |
Weight | 22 kg |
Type | DM400 |
Description | external diode module |
Maximum continuous current | 400 A |
Connector | large binding posts |
Dimensions | 350 x 180 x 170 mm (L x W x H) |
Weight | 1.6 kg |
這款浪涌發生器PG1275E是根據MIL-STD-1275E/GJB298-1986專門設計用于測試軍用28 Vdc電路的浪涌和尖峰的敏感性。 最大永久電流為16 A或由400 A的可選外部二極管模塊提供。 對于尖峰測試,電流限值由外部5μHLISN(人工網絡)給出。 可以使用LISN的不同版本。 發生器可以由計算機通過RS232或USB接口完全控制
This generator PG1275 is specially designed for the test of the susceptibility to surges and spikes of military 28 Vdc electric circuits. The equipment allows performing the following tests according to MIL-STD 1275D of: imported and exported spikes, imported and exported surges. The surge voltages are supported up to 125 V and the spike charging voltage up to +/-500 V. The maximum permanent current of the 5 μH internal coil is 400 A dc. The pulse generator can be ordered with all the accessories in order to build the full test set-up basically consisting of batteries and an oscilloscope. The generator can be fully controlled by a computer through a RS232 or an USB interface.
SPECIFICATIONS
Type | PG1275E |
Transients supported | injected spikes and injected surges |
EUT operating voltage | 28 Vdc |
EUT operating current (spikes) | depending on the LISN |
EUT operating current (surges) | 16 A (400 A with the DM400 diode module) |
Surge charging voltage | up to 200 V |
Spike charging voltage | up to ± 500 V |
Output connectors | BNC and 4 mm safety sockets |
Remote control | RS232 and USB |
Operating temperature | 0 – 40 oC |
Power supply | 210 - 264 Vac / 50 - 60 Hz / 100 VA |
Dimensions | 610 x 450 x 200 mm (L x W x H) |
Weight | 22 kg |
Type | DM400 |
Description | external diode module |
Maximum continuous current | 400 A |
Connector | large binding posts |
Dimensions | 350 x 180 x 170 mm (L x W x H) |
Weight | 1.6 kg |